Operation; Before Use; Adjusting The Telescopic Handle; Using The Appliance - Parkside PUV 1100 A1 Traducción Del Manual De Instrucciones Original

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation

Before use

NOTE
Push the loop of the extension cable into the
provided strain relief 4 in the handle 2 and
fix it to the bar provided.

Adjusting the telescopic handle

Turn the quick release
release it.
Extend the telescopic handle 5 to the desired
length.
Turn the quick release
again.
GB │ MT
30 
6 anticlockwise to
6 clockwise to lock it

Using the appliance

Connect the appliance to a power socket
(230 V alternating current) using an extension
cable.
Switch the appliance on by pressing the
ON/OFF switch 1.
The appliance is ready for operation after
approx. 30 seconds.
WARNING!
Heating work is forbidden when protective
cover 0 is closed, otherwise the appliance
may be damaged due to over-concentrated
heat.
Open the protective cover 0 by pressing the
lever 7 from above with your foot. Tip the
appliance backwards slightly to make it easier
to open the protective cover 0.
The protective cover 0 opens.
To kill weeds, move the heating element 9
over the plant to be treated for around
5–10 seconds (depending on the type of
plant).
Tall plants will need to be trimmed before you
can position the heating element 9 over them.
PUV 1100 A1

Publicidad

Tabla de contenido
loading

Tabla de contenido