About Radio Reception - Oregon Scientific RRM968P Manual De Instrucciones

Battery Installation:
1. Remove the battery compartment door by rotating it
direction of " " as shown
2. Insert 4 x AA 1.5V batteries in accordance to the polarities.
3. Press [RESET].
4. Replace the battery compartment door by rotating it back onto
the unit in the direction of "
When the battery power level is low, the respective low battery
indicator [ ] will light up. Replace the batteries or connect
AC power adapter.
Please note if only the AC adapter is connected and no battery is
installed, the low battery indicator [
up.
Using AC Power
in the
".
the
] for the clock will light
FEATURES
Section I — Radio-Controlled Calendar

ABOUT RADIO RECEPTION

After battery installation, the unit will automatically synchronize
its time and date with the radio signal when
range.
When the unit is receiving
start to blink. The reception icon will show either strong or weak
reception depending on the strength of the radio signal. A complete
reception generally takes about
When the reception is complete the reception icon will stop blinking. The
reception icon will show " "for no reception or "
reception.
The antenna icon indicates the quality of reception.
STRONG
WEAK
NO RECEPTION
IN PROGRESS
5
Clock
it is within reception
a radio signal, the reception icon will
2 to 10 minutes.
" for successful