Connecting Your Unit; Connections; Dvd/Vcr + Tv - RCA DRC8335 Manual De Usuario

DRC8335_EN(verB) 7/24/07

Connections

Connecting your unit

The RF coaxial cable supplied with this unit is only for passing the antenna signal to
the TV.
1. To use your new DVD/VCR player and recorder, you MUST connect the unit to the
TV with the supplied audio video cables (color-coded red, white and yellow) in
addition to the antenna cable.
2. Turn on the TV and tune it to the correct Video Input Channel (if you do not know
how to access the video input channel on your TV, refer to "Initial Setup" on page
12 for help). For more details about connecting to different types of equipment
and connection possibilities (options A-E), refer to page 6-8.
Option A: DVD/VCR + TV
For your unit to work properly, you must follow the instructions below.
3
RF coaxial cable
INPUT
2
Antenna cable
Option B: DVD/VCR + TV + basic cable box
For your unit to work properly, you must follow the instructions below.
3
RF coaxial cable
INPUT
2
Antenna cable
Cable box
6
9:25 AM Page 8
INPUT
Audio
1 Video
cables
Cb/
Cr/
DVD/VCR
OUTPUT
4
Power cable
AC120V
60Hz
INPUT
1
Cb/
Cr/
DVD/VCR
OUTPUT
4
Power cable
AC120V
60Hz
1 Connect the included Audio/Video cables as shown.
If your TV does not have AV inputs, you will need to buy an RF
modulator (not provided). Please refer to page 8 of the user
manual for more information.
2 Connect your existing antenna cable (from
antenna) to "ANTENNA IN".
3 Connect the provided RF coaxial cable as shown.
4 Connect the unit's AC power cable to a suitable
wall outlet.
5 Your unit is ready for use after the connections.
Please read page 12 to start using the unit.
1 Connect the included Audio/Video cables as shown.
If your TV does not have AV inputs, you will need to buy an RF
modulator (not provided). Please refer to page 8 of the user
manual for more information.
2 Connect your existing antenna cable (from cable
Audio
box) to "ANTENNA IN".
Video
cables
3 Connect the provided RF coaxial cable as shown.
4 Connect the unit's AC power cable to a suitable
wall outlet.
5 Your unit is ready for use after the connections.
Please read page 12 to start using the unit.
These are the audio/video cables.
The yellow cable carries the video
signal, and the red and white
cables carry the audio signal.