Dvd/Vcr + Tv + Satellite Receiver - RCA DRC8335 Manual De Usuario

DRC8335_EN(verB) 7/24/07
Connections
Option C: DVD/VCR + TV + satellite receiver
For your unit to work properly, you must follow the instructions below.
3
RF coaxial cable
INPUT
2
Antenna
Satellite
cable
receiver
Option D: DVD/VCR + TV + basic cable box + audio receiver
For your unit to work properly, you must follow the instructions below.
3
RF coaxial cable
INPUT
Audio
cables (red
2
and white)
Antenna
cable
Cable box
Note: graphics are for representation only and may differ from your actual units.
9:25 AM Page 9
INPUT
1
Cb/
Cr/
DVD/VCR
OUTPUT
Audio Video cables
4
(not included)
5
Power
cable
INPUT
1
Cb/
Cr/
DVD/VCR
OUTPUT
4
5
Power cable
Audio receiver
1 Connect the included Audio/Video cables as shown.
If your TV does not have AV inputs, you will need to buy an RF
modulator (not provided). Please refer to page 8 of the user
manual for more information.
Audio
Video
2 Connect your existing antenna cable (from
cables
satellite receiver) to "ANTENNA IN".
3 Connect the provided RF coaxial cable as shown.
4 Connect the audio cables as shown.
5 Connect the unit's AC power cable to a suitable
wall outlet.
6 Your unit is ready for use after the connections.
Please read page 12 to start using the unit.
AC120V
60Hz
1 Connect the included Video cable as shown.
If your TV does not have AV inputs, you will need to buy an RF
modulator (not provided). Please refer to page 8 of the user
manual for more information.
2 Connect your existing antenna cable (from cable
Video
box) to "ANTENNA IN".
cable
3 Connect the provided RF coaxial cable as shown.
4 Connect the included audio cables as shown.
5 Connect the unit's AC power cable to a suitable
wall outlet.
6 Your unit is ready for use after the connections.
Please read page 12 to start using the unit.
AC120V
60Hz
EN
7