Battery Usage; Battery Installation; Battery Removal; Battery Charging - Audiovox CDM-8900 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

BATTERY USAGE

C
1X
H
Phone is in the 1x service area.
1
Analog Mode
Phone is operating in analog mode.

BATTERY INSTALLATION

u
1
Place the battery on the back of the handset
v
and slide into place.
Push the battery down
until it locks into place.
Make sure the battery is securely placed to avoid slipping off
during a call.

BATTERY REMOVAL

u
1
Pull down the release latch, lift up the
v
battery and
remove the battery from the
handset.
If the battery is not correctly placed in the compartment, the
handset will not turn on and/or the battery may detach during use.
10
All manuals and user guides at all-guides.com
BATTERY USAGE

BATTERY CHARGING

POWER CONNECTION

1
Plug the AC charger into a
standard outlet.
• These times are for a new battery. Talking and Standby times may
decrease over time.
• Fully charge the battery before using – it is not charged when
purchased.
• It is more efficient to charge the battery with the phone turned off.

BATTERY TALK TIMES

The operating time is subject to your handset usage and configuration.
Battery
STD 1000 mAh
EXT 1700 mAh

BATTERY STANDBY TIMES

The operating time is subject to your handset usage and configuration.
Battery
STD 1000 mAh
EXT 1700 mAh
These times are for a new battery. Talking and Standby times may
decrease over time.
C
H
1
DCS
PCS
AMPS
190m
200m
80m
310m
350m
130m
AMPS
CDMA
20hour
140hour
35hour
240hour
11

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido