Assembly Instruction - Kenmore 119.16145210 Manual De Uso

Install Cabinet Left Side and Right Side Panels
1
Attach Cabinet Left and Right Side Panels to the Cabinet Base using 6 Phillips Head Bolts
(M6x10mm). Do not fully tighten bolts at this time.
Phillips Head
Bolt M6x10mm
Qty: 6
Install Cabinet Front Panel and LP Tank Bracket
2
Attach Cabinet Front Panel to the Cabinet Left and Right Side Panels using 4 Washer Head Bolts
(M4x10mm) at the top and bottom holes. Attach Front Panel so that end with center hole aligns with
hole on bottom of Cabinet Base.
Attach Cabinet Front Panel to the Cabinet Base using 1 Phillips Head Bolt (M6x10mm).
Ensure cabinet is square, and tighten all bolts.
Attach the LP Tank Bracket to the Cabinet Front Panel using 2 Washer Head Bolts (M4x10mm) in the
center holes as shown.
Phillips Head
Bolt M6x10mm
Qty: 1
Washer Head
Bolt M4x10mm
Qty: 6
LP Tank Bracket
Qty: 1

Assembly Instruction

15