Kenmore 119.16145210 Manual De Uso página 17

Attach Hood and Firebox Assembly to Cabinet Assembly and Install the Regulator Hose Support
5
Chain
Attach the Hood and Firebox Assembly to the front of the Cabinet Side Panels using 2 Phillips Head
Bolts (M6x10mm).
Attach the Regulator Hose Support Chain (located on the regulator hose) to the back of the Cabinet
Side Panel using 1 Washer Head Bolt (M4x10mm).
Phillips Head
Bolt M6x10mm
Qty: 2
Washer Head
Bolt M4x10mm
Qty: 1
Install Grease Pan Bracket and Grease Pan
6
Insert the Grease Pan Bracket into the bottom of lower heat shield.
Install the Grease Pan into the Grease Pan Bracket, inserting it from the back of the cabinet.
17