Cleaning And Maintenance - cecotec Ready Warm Black Manual De Instrucciones

ENGLISH
5. OPERATION
1. Turn the temperature knob clockwise to the MAX position.
2. Select the heating power level by turning on the power switch:
• Switch I: low-power heating.
• Switch II: medium-power heating.
• Both switches at the same time: maximum-power heating.
3. Turn switches and the knob off and remove disconnect it from the power supply to
disconnect completely the device.
Thermostat
• When the room has reached the desired temperature, turn the temperature knob
anticlockwise until the light indicator turns off. When the room temperature falls below
this temperature, the device will switch on automatically until the set temperature is
reached again.
• To change the set temperature, turn the temperature knob clockwise to increase it or
anticlockwise to decrease it.
Overheat protection
• The device includes a safety system which automatically turns off the radiator when it
gets excessively hoy.

6. CLEANING AND MAINTENANCE

• Always turn off, unplug and allow the appliance to cool down before cleaning.
• Do not use abrasive scouring pads, powders or cleaners to clean the product.
• Use a soft, dampened and clean cloth to clean the product's outer housing. Be careful
not to touch the heating elements.
• If the heater is not going to be operated for a long period of time, store it in a dry and
safe place where it is protected from dust.
WARNING: do not immerse the appliance in water
7. TECNICAL SPECIFICATIONS
Models and References:
Ready Warm 5600 Space.(05335)
Ready Warm 5620 Space (05344)
1500 W, 220-240 V, 50/60 Hz.
Made in China | Designed in Spain
14 READY WARM SPACE