Vollrath ServeWell Manual Del Operador página 2

ASSEMBLY
NOTICE: Place cardboard or a drop cloth on the floor to protect the
work surface of the equipment during assembly.
1. Remove all of the components from the shipping container.
2. Place the pan assembly on the floor with the bottom of the pan
facing up.
Attach the Legs
1. For each leg, remove the four corner screws.
2. Position the leg against the pan.
3. Re-insert and tighten the screws to attach the leg.
2
Attach the Shelf
1. Remove the two innermost screws from each corner of the shelf.
2. Face the top of the shelf toward the bottom of the pan.
3. Position a corner of the shelf against a leg.
4. Reinsert and tighten two screws to attach the shelf to the leg.
5. Repeat for each corner of the shelf.
Attach the Feet
1. Attach the feet to the triangular leg mounting plates using the
included locknuts and washers.
2. Lift the equipment and set on its feet.
©
ServeWell Cold Food Tables Operator's Manual