Assembly And Operation - Klarstein KRAFTPROTZ Manual Del Usuario

EN

ASSEMBLY AND OPERATION

Hold the head and insert it into the connection. When inserting, make sure that the
head is slightly inclined (see Figure 1). When you have inserted the head, turn it
clockwise until it is firmly seated (see Figure 2).
First insert the snail with the long end into the head and turn it slightly until it is seated
in the motor housing (see Fig. 3). Place the cutter blade on the snail shaft as shown
with the blade facing forward (see Figure 4). If the knife is not mounted correctly, the
meat will not be minced.
16