Página 1
RP24209L Spout Assembly Ensamble del Tubo de Salida RP24210L Spout Assembly Ensamble del Tubo de Salida RP6068L Plug Button Botón del Tapón Bouton RP18357L RP18395 RP24211L RP18358L Stream Straightener Set Screw Stream Straightener Plug Button & Set Screw Enderezador del Chorro Tornillo de Presión Enderezador del Chorro Botón de Tapón y Tornillo de Presión...
Toutes les autres conditions de la garantie de cinq ans sont identiques au Canada) et par écrit à l'une des adresses suivantes : à celle de la présente garantie. La présente garantie s'applique à tous les robinets Brizo ®...
Página 3
Inscrivez le numéro de modèle ici. You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: 1/8" (3.17mm) 1/8 po For easy installation of your 1/8" (3.17mm) Brizo faucet you will need: ® 1/8 po • To READ ALL the instructions completely before beginning.
Página 4
NOTE: The deck and valve rough-in must be finished before installing the trim kit. Unscrew the test cap (1) and discard. Install gasket (1), base (2) and spout (3) on the spout adapter Note: For tile applications that use the RP18235 Thick Tile Rough-In, (4).
Página 5
Using silicone sealant (1) under the spout (2), install the spout Install handles. NOTE: If either handle does not rotate the correct direction, on the spout adapter (3). Be sure the spout is resting firmly on do the following: the deck. 1.
Maintenance f faucet leaks from spout outlet: SHUT OFF WATER SUPPLIES. Remove Stream Straightener (1) [if applicable]. Turn faucet Replace Stem Unit Assembly (2)*–and Seats and Springs (1)*. handles (2) all the way on. Turn on hot and cold water supplies f faucet exhibits very low flow: SHUT OFF WATER SUPPLIES.