Care & Cleaning; Troubleshooting - Envirolite EV1014A-WH Manual De Instrucciones

OPERATION
 Turn on power at the circuit breaker or fuse box.
 Turn the light switch on to activate the fixture.
CARE & CLEANING
E M
XTERIOR AINTENANCE

Use a dry or slightly dampened
clean cloth and wipe the surface
of the fixture.
I M
NTERIOR AINTENANCE

Disconnect power to the fixture by turning off the circuit breaker or by
removing the fuse at the fuse box.

Use a dry or slightly dampened clean cloth to wipe the interior surface of the
fixture.

TROUBLESHOOTING

Problem
The light will not turn on.
The fuse blows or circuit breaker
trips when light is turned on.
NOTE: Do not use any cleaners
with chemicals, solvents, or harsh
abrasives. Use only a dry soft
cloth to dust or wipe carefully.
Solution
 Make sure the power supply is on.
 Test or replace the switch.
 Check the wiring.
 Check the wire connections
6