Connecting To An Antenna Or Cable Connection; Plug & Play (Initial Setup) - Samsung 450 Serie Manual Del Usuario

Getting Started
Connecting the power cord and an antenna or cable connection.
✎
Connecting the power cord and antenna.
✎
The PDP device may interfere with an amateur radio or AM radio.
Power Input
When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic settings. To turn on
the TV, press the POWERP button. Plug & Play is available only when the Input source is set to TV.
✎
Plug & Play is available only when the Source is set to TV.
✎
To return to the previous step, press the Red button.
1
Selecting the OSD
language
2
Selecting Store Demo
or Home Use
3
Selecting an antenna
4
Selecting and
memorizing channels
5
Setting the Clock
Mode
6
View the HD
Connection Guide.
7
Enjoy your TV.
If You Want to Rerun Plug & Play...
O
MENUm → Setup → Plug & Play → ENTERE
8
English

Connecting to an Antenna or Cable Connection

Plug & Play (Initial Setup)
Press the ◄ or ► button, and then press the ▲ or ▼ button to
select a language. Press ENTERE when done.
Press the ◄ or ► button, then press the ENTERE button.
y Select the Home Use mode. Store Demo mode is for retail
environments.
y To return the unit's settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you
see the volume OSD, press and hold
Press the ▲ or ▼ button, then press the ENTERE button. Select Air, Cable or Auto.
The channel search will start automatically. This can take up to 30 minutes.
For more information, refer to Channel → Auto Program in the e-Manual.
y Press the ENTERE button at any time to interrupt the memorization process.
Press the ◄ or ► button. Press the ▲ or ▼ button to select Auto or Manual, and then
press ENTER.
y If you selected Auto, you'll select the time zone where you live next, and then select
whether to turn DST (Daylight Savings Time) on or off.
y If you selected Manual, you'll use the number buttons or ▲ or ▼ button to set the date
and time. Use the ◄ or ► button to move between entry fields.
Set up your network connection. Press the ENTERE button to start. If you do not know
your network set up information or want to set to it later, select Skip. We suggest you skip
network connection setup now and refer to "Network menu" in the e-Manual for set up
requirements and instructions, and the Network Connection section of this manual (Page
12). You can set up the network connection later using the Network menu.
Press the ENTERE button.
VHF/UHF Antenna
Antenna Cable (Not Supplied)
or
MENU for 5 sec.
Cable
ANT OUT
POWER
P