Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung 4+ Serie Manual De Usuario

When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
Power Input
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the Red button.
1
Selecting a language
2
Selecting Store Demo
or Home Use
3
Check antenna input.
4
Selecting a channel
5
Setting the Clock
6
Enjoy your TV.
If You Want to Reset This Feature . . .
O
MENUm → Setup → Plug & Play → ENTERE
All manuals and user guides at all-guides.com

Connecting to an Antenna

Plug & Play (Initial Setup)
Press the ▲ or ▼ button, then press the ENTERE button. Select the
desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTERE button.
y Select the Home Use mode. Store Demo Mode is for retail
environments.
y To return the unit's settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume OSD, press and hold
Select OK.
Press the ▲ or ▼ button to select Air, STD, HRC, or IRC, then press the ENTERE
button. For more information, refer to Channel → Auto Program (p. 12).
✎
Press the ENTERE button at any time to interrupt the memorization process.
Set the Month, Day, Year, Hour, Minute, or am/pm.
Press the ENTERE button.
VHF/UHF Antenna
or
MENU for 5 sec.
Cable
ANT OUT
POWER
P
7
English