Big Date Chronographs - Esq 101042 Manual De Instrucciones

This watch features an oversized date win-
dow with two single-digit disks that rotate
independently of one another.
Each day, during the calendar "jump phase"
– the hours between 10:00 pm and 12:00
midnight – the date will change automatically.
NOTE: The date may be adjusted manually
during these hours; however it must be set
to the following day: the date will not auto-
matically change at midnight if it has been
manually adjusted during the jump phase.
To manually adjust Big Date display:
(see Figure 4)
1. Pull crown out to position 2. (Watch will
continue to run)
2. Turn crown clockwise until correct digit
appears in each of the two Big Date windows.
3. Push crown back in to position 1, flush
against case.
18
All manuals and user guides at all-guides.com
BIG DATE CHRONOGRAPH
Figure 5
Legend:
H - Hour hand
M - Minute hand
S - Seconds hand
C - Chronograph seconds counter
E - Chronograph minutes counter
G - Chronograph tenths-of-a-second counter
D - Big Date display
1, 2, 3 - Crown positions
A, B - Push-buttons for operation of
chronograph
19