Esq 101042 Manual De Instrucciones página 15

4. Press button A a fourth time to stop chrono-
graph again.
NOTE: Each time you stop chronograph,
chronograph hands will indicate total accumu-
lated time.
5. Repeat steps 1 and 2 to add each additional
interval of time.
6. After you have taken your final accumulated
time reading, press button B to reset chrono-
graph hands to zero.
Split-time or intermediate time functions:
To take intermediate time readings as a race
progresses:
1. Press button A to start chronograph.
2. Press button B to momentarily stop
chronograph.
3. Read off the intermediate time, for example:
20 minutes, 26 seconds, 3/10 of a second.
4. Press button B to resume chronograph func-
tion. Hands will catch up with ongoing event.
28
All manuals and user guides at all-guides.com
5. To read a second split time, press button
B again.
Repeat steps 2 through 4 to take any addi-
tional split times.
6. Press button A to stop chronograph.
7. Take a reading of the final time, for exam-
ple: 57 minutes, 3 seconds, 7/10 seconds.
8. Press button B to reset chronograph to
zero.
First place and runner-up results:
To measure both a winning time and runner-
up results:
1. Start chronograph by pressing button A.
2. As soon as winner crosses finish line,
press button B. Chronograph will stop.
3. When second runner crosses finish line,
press button A.
4. Note time for the winner as shown on
the dial.
29