Esq 101042 Manual De Instrucciones página 13

A chronograph combines two time-keeping
functions. It incorporates a device to meas-
ure intervals of time independent of the reg-
ular time shown on the dial.
Adjusting the time:
1. As soon as small seconds hand S reaches
<<60>> position, pull crown out to position 3.
The watch will stop.
2. Turn crown to move hands and set time,
making sure date changes at midnight, not
noon.
3. Move hands slightly ahead of exact time,
then slowly turn crown counterclockwise to
align minute hand with correct minute marker.
4. Take an accurate time signal (from a radio
news station, for example). When audible
tone signals exact time, immediately push
crown back in to position 1. Watch will
restart, now set to the exact time.
24
All manuals and user guides at all-guides.com
Correcting time zone and date:
1. Pull crown out to position 2.
2. Turn crown to move hour hand H ahead or
back after crossing into another zone, or to cor-
rect for daylight savings/standard time change.
3. To change date D, advance hour hand H
by two complete revolutions, otherwise date
will change at noon.
These adjustments will not stop the watch
and do not affect the time indicated by the
minute and seconds hands.
4. Once adjustments have been made,
immediately return crown to position 1.
Chronograph Function Overview
Use buttons A and B to operate the chrono-
graph. Pressing button A the first time will
start the chronograph. While the chrono-
graph is running, once the chronograph sec-
onds counter hand C has completed one turn,
25