Tripp-Lite AV550SC Manual Del Propietário página 6

Basic Operation
8
REGULATED 12V DC CONNECTOR: This connector provides an additional power
source for 12V DC devices. It features a delay start function and will turn on
approximately 60 seconds after the unit powers up.
Note: Observe polarity (+/-) before connection. Do not exceed 1 amp draw.
Steps for proper wiring of male connector:
1. Strip wire to appropriate length.
2. Insert small screwdriver into slot on crimping button.
3. Insert wire into the hole.
4. Release screwdriver.
6
17-05-142-932710.indb 6 6/2/2017 11:48:05 AM