Publicidad
1. Install and program the AXSWC, then test all buttons for proper function.
Note: Bluetooth buttons will not work until Step 2 is done.
For AXSWC vehicle instructions, please refer to the AXXESS website: https://axxessinterfaces.com/
2. Locate the Bluetooth module, disconnect the 32-pin harness, and then connect the AXBTH-NIS to
the harness removed.
3. Test that the Bluetooth buttons now function.
Note: Ensure that the phone is paired to the aftermarket radio.
AxxessInterfaces.com
INSTALLING
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
AXBTH-NIS
I N S TA L L AT I O N I N S T R U C T I O N S
REV. 11/3/20 INSTAXBTH-NIS
Publicidad
