Tivoli Audio Portable Audio Laboratory PAL Manual De Instrucciones página 10

Tabla de contenido

Publicidad

English
Replacing the battery pack:
When it comes time to replace the battery pack, lift the FM antenna up, remove the two
screws that hold the battery cover in place with a small Philips-head screwdriver. Lift the
battery cover off, disconnect the lead from the battery pack and replace the batteries,
making sure to correctly connect the leads. Replace the battery cover by inserting the
bottom lip first, then screwing the cover back on. Replacement battery packs may be
purchased from your authorized dealer/distributor or Tivoli Audio.
CAUTION: To reduce the risk of fire or personal injury, use an exact replacement
battery pack, available through Tivoli Audio or its authorized dealers, and dispose
of the spent battery pack according to your state/country's regulations.
Handling the PAL:
• The PAL is weather resistant, but it is not weather proof. It should not be immersed in water
or held under running water. It also should not be exposed to extreme temperatures.
• The PAL is designed to be portable, but it is not indestructible. Do not drop it or subject
it to strong impacts.
• Always grip the PAL using the side indentations.
• The PAL's non-slip, weather resistant coating is durable, but it is not impervious to
scratches.
• The PAL's speaker is magnetically shielded, permitting use near a computer monitor or
a television set.
• It is normal for the power supply to become warm during use.
• Exposing the PAL to extended periods of direct sunlight or heat could damage the rubber
coating.
Cleaning:
The PAL's exterior rubber coating is designed to provide a non-slip grip and be water
resistant. However, some common chemicals may strip the coating. If something is spilled
on the cabinet, wash it off as soon as possible to prevent possible damage. Normal everyday
wear and tear, or damage resulting from cleaning or chemicals, is not covered under the
factory warranty. To clean the PAL, use water and a soft cloth and do not rub hard. Use a
mild soap only when necessary.
Unlike the PAL, the iPAL typically has a water-resistant painted cabinet instead of a rubberized
coating. However, it should be handled with the same care.
Headphones:
Avoid using headphones (not included) at high volume levels to prevent possible hearing
damage. Do not wear headphones while operating a motor vehicle.
10
All manuals and user guides at all-guides.com

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Portable audio laboratory ipal

Tabla de contenido