Descargar Imprimir esta página

Brizo Virage 68430 Manual De Instrucciones

Publicidad

Enlaces rápidos

Models/Modelos/Modèles
68430
Virage
Collection
®
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:
For easy installation of your Brizo
faucet you will need:
• To READ ALL the instructions completely before
beginning.
• To READ ALL warnings, care, and maintenance
information.
• To purchase the correct water supply hook-up.
Para instalación fácil de su llave
Brizo
usted necesitará:
®
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
• Comprar las conexiones correctas para el
suministro de agua.
Pour installer votre robinet Brizo
facilement, vous devez:
• LIRE TOUTES les instructions avant de début-
er;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
• Acheter le bon nécessaire de raccordement.
www.brizo.com
THREE HANDLE ROSETTE BIDET VALVE WITH
61465
VACUUM BREAKER AND POP-UP ASSEMBLY
VÁLVULA DE TRES MANIJAS PARA EL BIDÉ DE
BOQUILLA ROCIADORA CON ROMPEDOR DE
VACÍO Y ENSAMBLE DEL DESAGÜE AUTOMÁTICO
ROBINET À TROIS POIGNÉES POUR BIDET AVEC
AJUTAGE, CASSE-VIDE ET RENVOI MÉCANIQUE
T E FLO N
®
®
1
2.5 mm
(3/32")
N
O
T
L
E
F
3/32" (2.38mm)
3/32 po (2.38mm)
3/32" (2.38mm)
3/32 po (2.38mm)
2.5 mm
(3/32")
8/15/15
Rev. D

Publicidad

loading

Resumen de contenidos para Brizo Virage 68430

  • Página 1 You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: T E FLO N 3/32" (2.38mm) 2.5 mm 3/32 po (2.38mm) (3/32") For easy installation of your Brizo ® faucet you will need: 3/32" (2.38mm) 3/32 po (2.38mm) • To READ ALL the instructions completely before beginning.
  • Página 2 350 South Edgeware Road Indianapolis, IN 46280 St. Thomas, Ontario, Canada N5P 4L1 Componentes electrónicos y pilas (si aplicable) Todas las piezas (salvo las pilas), si hay, de esta llave de agua Brizo ® están garantizadas al con- 1-877-345-BRIZO (2749) 1-877-345-BRIZO (2749) customerservice@deltafaucet.com customerservice@mascocanada.com...
  • Página 3 RP62467▲ RP62469▲ Diverter Handle & Set Screw Lift Rod Manija Desviadora y Tornillo de Ajuste Barra de Alzar Manette d’inverseur et vis de calage Tirette RP62468▲ Diverter Body Cuerpo Desviador Corps d’inverseur RP62470▲ Rod Guide Assembly (Complete) Ensamble de la Barra de Guía Guide-Tirette (Complet) RP48449 Diverter Valve / Vacuum...
  • Página 4: Mantenimiento

    RP62374 Handle Buttons, Set Screws & Allen Wrench Botones de Manijas, Tornillos de Ajuste y Llave Allen Clé Allen, vis de calage et boutons pour manette RP62373▲ Hot & Cold Handle Assemblies Ensambles de las Manijas de Agua RP41896 Caliente y Fría Glide Ring Aro para Deslizar Manettes d’eau...
  • Página 5 INSTALLATION OF DIVERTER VALVE/VACUUM BREAKER Note: Please refer to bidet bowl installation instructions to identify hole location for diverter valve. Hole size must be 1-1/8” diameter minimum. INSTALLATION OF ROSETTE SPRAY Assemble diverter valve (1) with “Y” and gasket (2) as shown in illustration. Slide one rubber cone Apply silicone bead (1) under rosette (2).
  • Página 6 1/2" (12.7 mm) INSTALLATION OF VALVE ASSEMBLIES Place assembly (1) through proper mounting hole from bottom. Install mounting nut (2) on MAKE CONNECTIONS TO WATER LINES: top of valve assembly by screwing it until it stops. Tighten bottom nut (3). Install handle base (4) onto end valve and secure with nut (5).
  • Página 7 Step 3b METAL POP-UP Step 3c Remove stopper (1) and flange (2). Apply silicone to underside of flange (1). Insert Remove pivot nut (1). Install horizontal rod body (2) into sink. Screw flange (1) into body (2). (2) and stopper (3) as removable (4) or non- removable (5).
  • Página 8: Instrucciones Para Su Funcionamiento

    2.5 mm (3/32") FLUSH YOUR SYSTEM INSTALL HANDLES: Turn diverter handle (1) counterclockwise to ‘rim feed’ position. Turn on water supplies (2) and turn Look inside the bottom of the handles to determine cold hot and cold handles (3) to open position for one minute to flush any debris from system. (C) and hot (H) handles.