Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING: READ AND FOLLOW ALL INSTRUCTIONS AND
WARNINGS BEFORE ASSEMBLING OR OPERATING THE GRILL.
THE FOLLOWING TOOLS ARE REQUIRED TO ASSEMBLE THIS
GRILL.
Phillips Screwdriver
Adjustable end wrench
Assembly Instructions
1. Remove all contents from packaging.
2. Remove any loose parts from the inside of the grill.
3. Turn the grill upside down.
4. Fold legs out by pulling on leg (1) and swinging it into
position (2). Make sure the leg locks into place (3).
3
5. Stand the grill upright.
6. Assemble side handles as shown.
7. Unlatch shelves and fold out. Adjust handles up or down
to level shelves. Tighten all handle hardware.
4
2
1
M6 X 16 BOLT (8)
HANDLE (2)
FTG600P-5
8. Install the griddle on the stove body as shown in Figure 3.
9. Install the griddle grease cup holder as shown in Figure
3. (Note: Make sure to slide the grease cup all the way to
the right side so it is under the grease drain tube of the
griddle.)
GRIDDLE (1)
SG600
FIG 1
FIG 3
Warning: Never use the griddle without the griddle grease
cup holder installed.
10. Level griddle by adjusting leveling feet up or down.
FIG 2
GRIDDLE GREASE CUP (1)
FTG600P-1
Publicidad
