Lenco ODR-150 Manual Del Usuario página 10

Ensemble/Multiplex(Group name): The ensemble/multiplex is a group of stations that are bundled
and transmitted together in one single frequency. There are national and local multiplexes, local
ones contain stations that are specific to the local area.
Frequency: The display will show the frequency of the station being broadcast.
Signal strength: The display will show a slide bar to indicate the strength of the signal. The stronger
the signal, the longer the bar.
Signal error: This is displayed as number between 0-99. It would not be possible to satisfactorily
listen to a radio station with a signal error rate of 30 or above.
Audio bit rate: The display will show the digital audio bit rate being received.
Time and date: the time and date will be automatically updated by the radio.
DAB mode- System settings
Sleep: Rotate the "Enter" knob to navigate to "Sleep", choose among Sleep off-15 minutes-
30 minutes-45 minutes-60 minutes-90 minutes, then press "Enter" knob to confirm.
Equalizer: Rotatethe "Enter" knob to choose among -Normal-Classic-Jazz-Pop-Rock-Speech, My EQ,
My EQ set up(Treble, Bass)
Time/Date: Set Time/Date
Press the "Enter"knob, the Date digit will flash, rotate the "Enter" knob to choose correct date and
press the "Enter" knob to confirm.
The Month digit will start to flash. Rotate the "Enter" knob to choose correct month and press the
"Enter"knob to confirm.
The Year digit will start to flash. Rotate the "Enter" knob to choose correct year and press the
"Enter"knob to confirm.
The Hour digit will start to flash. Rotate the "Enter" knob to choose correct hour and press the
"Enter"knob to confirm.
The Minute digit will start to flash. Rotate the "Enter" knob to choosethe correct minute and press
the "Enter" knob to confirm.
10