NAMCO VAMPIRE NIGHT DX Manual Del Operador página 50

1P GUN INITIALIZE
AIM AT CENTRE OF THE CROSS
AND PULL 1P GUN TRIGGER
Aim the 1P gun at the cross in the bottom left of the screen and pull the trigger.
The screen will revert to showing a cross in the centre of screen. Repeat the
above procedures with the 2P gun.
When the 2P gun has been aimed and fired on the screen above, the screen will
display the ‘GUN INITIALIZE’ screen.
Recheck that both guns are aiming correctly.
Press the Enter switch to return to the I/O TEST screen or press the Service
switch to re-enter the Gun Initialize mode.
When aiming the gun, ensure that the gun is upright and pointing directly to the
screen and that the sights are in alignment.
SIGHT ALIGNMENT
Page 50
1P GUN INITIALIZE
AIM AT CENRE OF THE CROSS
AND PULL 1P GUN TRIGGER