Cleaning And Maintenance; Troubleshooting - Vornado CYLO50 Manual Del Usuario

CLEANING AND MAINTENANCE

HOW TO CLEAN
Because large volumes of air pass through your Vornado Air Purifier
each day, it will need regular cleaning.
1. Turn unit off and unplug before cleaning.
Note: Do not use gasoline, thinners, solvents or other chemicals for
cleaning.
2. Wipe down with a soft, damp cloth.
3. Dust or vacuum the top air outlet. It is recommended to clean the
interior when the Filters are changed.
OTHER MAINTENANCE
The motor is permanently lubricated so it needs no service. No other
serviceable parts, other than Filters, are contained within the unit.
12 English
STORAGE
Follow the steps listed below when you are ready to store your unit.
1. Unplug power cord and bundle loosely.
2. Cover, or place back in retail carton if available. This will prevent
the unit from accumulating dust overtime.
4. Store unit in a cool and dry location.

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE AND SOLUTION
Unit fails to power on.
Unit is not plugged in. Plug power cord into electrical outlet.
Household circuit breaker / ground fault interrupter has tripped or blown a fuse. Reset circuit breaker /
ground fault interrupter, or replace fuse. For assistance, contact a licensed electrician.
Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance.
Airflow is weak or slow.
Unit set to a low speed setting. Adjust to a higher speed setting.
Debris build-up on filter. Check and replace Filters.
Airflow is blocked. Remove obstruction.
English 13