Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
®
Nyx 1
Day/Night Photocontroller
Easy Guide
VANCOUVER, W ASHINGTON U.S.A.
Instructions for Use
1. Mount Nyx 1 near equipment to be controlled, but
away from water, mist, vapor, etc.
2. Switch controller to Day OR Night.
3. Plug equipment to be activated into female side of
piggyback cord set.
4. Turn "On" power to equipment to be controlled.
5. Plug male side of piggyback cord set into 120 volt,
15 amp outlet.
6. The Nyx 1 will now activate and deactivate equip-
ment based on Day OR Night setting.
Controller Specifi cations
Size: 8"H x 4.5"W x 2.5"H
Weight: 2 lbs.
Voltage Input: 120 volts
Voltage Output: 120 volts
Maximum Amperage: 15 amps
Hertz: 60 Hz
Photocell activation time: ~ 1 minute
Cord Set: 6 feet/14AWG/SWJT
o
o
Storage Temperature: 0
to 135
F
o
o
Operating Temperature: 40
to 110
www.titancontrols.net
For technical assistance call us at
1-888-80-Titan or 1-888-808-4826.
Out
F
®
Controlling a Lighting Fan
Fan
Sun System
R
Nyx 1
Controlling an Exhaust Fan
Fan
Out
Nyx 1
Publicidad
Manuales relacionados para Titan Controls Nyx 1
Resumen de contenidos para Titan Controls Nyx 1
- Página 1 Instructions for Use Controlling a Lighting Fan 1. Mount Nyx 1 near equipment to be controlled, but ® away from water, mist, vapor, etc. 2. Switch controller to Day OR Night. 3. Plug equipment to be activated into female side of Nyx 1 piggyback cord set.
- Página 2 Instrucciones de uso Control de un ventilador de un sistema de iluminación 1. Instale la unidad Nyx 1 cerca del equipo que se ® controlará, pero lejos de atomizadores, vaporiza- dores, agua, etc. Ventilador 2. Coloque el controlador en la posición de día (Day) O Nyx 1 BIEN de noche (Night).