Disposal And Declaration Of Conformity - Klarstein 10031822 Manual Del Usuario

Problem
No wind and no steam.
Steam with peculiar
smell.
Noise.
Steam out from outlet
surrounding.
There is water in the
tank, but the device
indicates waterless.
Small mist output or
no mist output with
indicator on.

Disposal and Declaration of Conformity

According to the European waste regulation 2012/19/EU this symbol on the product
or on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more de-
tailled information about recycling of this product, please contact your local council or your
household waste disposial service.
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
11
Possible Cause
The sealing ring on the air flue was
disassembled with distortion.
The air flue was not locked tight.
Other dirty on the air flue and
valve body.
New device.
Dirty water or the water in the
tank for a long time.
Less water in tank.
Resonance with the table surface.
Clearance between steam outlet
and water tank.
Something may stuck the float
and water can't flow out to the
water sink.
There are scales or some dirty on
the valve body. The water can't
flow out to the water sink.
Solution
Disassemble the air flue, pour out the water
and clean the air flue. And then assemble
the valve body and sealing ring to the air
flue without any distortion.
Open the top cover and put the device in
the shady and cool place for 12 hours.
Clean the water tank and replace the clean
water.
Add water.
Put the device on the firm and flat place.
Soak the nozzle into the water and use it
again.
Take out the air flue and clean it. And then
assemble it back to the device.
Clean the air flue and valve body and then
try again.