Kohler K-15182 Guia De Instalacion página 4

Fixture
Thick Tapered Gasket
(for thin-walled vessel style
lavatory installations)
2. Pop-Up Drain Installation
Remove the protective cover from the flange.
Apply a ring of plumbers putty or other sealant to the underside
of the flange according to the putty manufacturer's instructions.
Assemble the nut, flat washer, and tapered gasket (tapered side
up) fully onto the body.
From the underside of the fixture, insert the drain body up into
the drain hole.
From the top of the fixture, securely hand tighten the flange onto
the drain body.
Make sure the drain body seal hole is facing the back of the
fixture, and securely tighten the nut.
Remove any excess putty or sealant.
1010442-2-D
Flange
Apply plumbers putty.
Tapered Gasket
Washer
Nut
Drain Body
4 Kohler Co.