Utilization Limits - BWT MY POOL Plug and Play Defrost Manual De Instrucciones

Electrical installation
This machine must be installed in conformity with local electrical norms.
Safety
Although this product contains all safety requirements, it may still present dangers such as:
Electrically controlled parts
Parts moving with automatic start-up (fan)
Cutting edges (evaporator)
In order to avoid accidents, prevent close access the appliance by children and pets. Never cover the
appliance whilst in operation and never put your fingers, or other objects inside.
Never turn on the appliance with any of its panels removed.

Utilization limits

Heat pump models from this manual are designed to operate from 10°C to +35°C C (5°F to 95°F) air temperature using
a pool cover.
Before installing the heat pump, you will have checked that the impedance of your swimming pool electricity power
supply shall not be more than 0.042 Ω.
Ask your electricity provider if necessary.
If the electricity provider can not adjust it, it could translate into a tension reduction on the power supply for few
seconds when the heat pump starts up.
Maximum water pressure : 1 bars
- 5 -