Kohler 103B86-SANA-CP Guia De Instalacion página 7

Flex Hose
Supply
Stop
4. Supply Connections
Inlet Connections
Connect the flex hose from the control box to the supply stop.
Outlet Connections
Verify that the tube from the spout is the appropriate length to
reach the control box. Cut the tube if necessary. Remove any
burrs and sharp edges.
Insert the tube into the fitting (control box outlet end) until the
tube stops.
Verify that the tube is secure.
Kohler Co.
Tube
Flex Hose
From Spout
Outlet
7
Inlet
1386432-2-A