Status Indicators; Mounting - SICK C2000 Eco Manual Del Usuario

Addendum Operating Instructions
C2000 Eco
Fig. 1: Status indicators
C2000 Eco
4

Mounting

Note
8011905/TI60/2010-02-12
Subject to change without notice
Mounting
3.2

Status indicators

The C2000 Eco entry-level model does not have a 7:segment display, therefore it has no
status or diagnostics features. The LED displays are also different to those on the C2000
Standard.
LED yellow: operating voltage
LED red: output signal switching device off
The C2000 Eco safety light curtain cannot be fastened using the swivel mount bracket.
Sender and receiver are each fastened using two side brackets. Mounting is described in
chapter 4.2 "Mounting with side bracket" in the original original "C2000 Safety Light
Curtain" operating instructions.
When ordering accessories (see chapter 11.1 of the operating instructions for the C2000
safety light curtain), please note that only the following items can be used with the
C2000 Eco for fastening and wiring:
mounting kit 6 with side bracket
M12 cable socket 5-pin with cable
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
Sender
LED green: output signal switching device on
Chapter 4
Receiver
GB
29