Safety Rules; General; Specific Precautions - Promax PROLITE-50 Serie Manual De Instrucciones

USER'S MANUAL. PROLITE-50

2. SAFETY RULES

2.1 General

* This is a class I equipment, for safety reasons plug it to a supply line with the
corresponding ground terminal.
* When using some of the following accessories use only the specified ones to
ensure safety.
Mains power supply AL-500
* Observe all specified rating both of supply and measurement.
* Remember that voltages higher than 60 V DC or 30 V AC rms are dangerous.
* Use this instrument under the specified environmental conditions.
* The user is only authorised to carry out the following maintenance operations:
Any other change on the equipment should be carried out by qualified
personnel.
* Follow the cleaning instructions described in the Maintenance paragraph.

2.2 Specific precautions

CAUTION It is recommended do not watch directly the laser beam.
The use of devices that are not the specified ones in this manual as
well as internal manipulation of the equipment can be cause of
dangerous radiation.
01-2006 Page 5