Save Trace - Promax PROLITE-50 Serie Manual De Instrucciones

• In order to increase the trace horizontally to keep pressed [
• In order to decrease the trace horizontally to keep pressed [
• In order to increase the trace vertically to keep pressed [
• In order to decrease the trace vertically to keep pressed [

5.5 Save Trace

When auto or manual measurement is finished, the measurement trace can be
saved. Contents of trace saved include: Trace curve, related information of trace.
•
Under GUI of figure 5.26, use [
[Enter] to enter, as shown in figure 5.28.
•
Input filename: use [
character one by one, and press [Enter] to confirm. The length of filename will
not exceed 8 characters alphanumeric.
•
Save file: use [
save.
•
Cancel saving file: use [
[Enter] to cancel the operation of "save file".
•
Delete alphanumeric character: use [
"Delete", press [Enter] to delete the alphanumeric character.
Page 44
Sp a c e Us e d: 1 1 8 / 1 0 0
T
RACE0
ABCDEFG HI JKLM
NOPQ RSTUVW XYZ
1234567890 _
OK Ca n c e l
12Km/ Di v 3 .5 0 d B / D i v
30 s
Ave. Ti m e :
Range :
80 km
I O R : 1. 4659
Figure 5.28.- Save Trace
], [ ], [
], [ ], [
], [
USER'S MANUAL. PROLITE-50
] and [ ] to highlight
T
De l e t e
t ra ce 1 .t rc
Par a - 1
Pul seW i dt h : 2 . 5us
W avel engt h : 1550 nm
] and [ ] to choose the alphanumeric
] and [ ] to highlight "OK", press [Enter] to
], [ ] and [ ] to highlight "cancel", press
], [ ], [
] and later [
] and later [
] and later [ ]
] and later [ ]
, and press
A
B
] and [ ] to highlight
01-2006
]
]