Cursors; Increasing And Decreasing Of The Trace Visualization - Promax PROLITE-50 Serie Manual De Instrucciones

USER'S MANUAL. PROLITE-50

5.3.3 Cursors

The PROLITE-50 has two cursors (A and B) available which can be displaced
throughout the trace in order to provide specific information about each point. In order to
exchange the active cursor to use [
Enter ] to switch between marker A/B.
Use [ ] and [
Press [ ] to change the information window to A or B marker.
Press [ ] or [
information of A/B marker will change in agreement with the information window.

Increasing and decreasing of the trace visualization

5.4
In order to be able to visualize the events more accurately, the equipment
incorporates the increasing and decreasing functions of trace visualization.
•
The function indicated with [
trace horizontally, whereas the [
•
The function indicated with the [
trace vertically, whereas the [
Use [ ] and [
The visualisation of the plan can be increased up to 10 times. In the case of the
horizontal increase, the zone of plan of the cursor will be centred in display that is
active.
Use [ ] and [
The cursor (A/B) switching function as well as movement through events [
and [ ] does not modify the visualization of the plan and automatically it centres on
screen the cursor or event selected with these functions. The increasing / decreasing
function, also can be executed by means of a combination of hotkeys for quick access.
01-2006
] and [
] to move the A or B marker.
] to change the position of the marker A or B, and the
] to select the function desired and press (ENTER)
] to move cursors more accurately through the trace.
] to select the B
] icon in menu, serves to increase the
] icon serves to diminish it.
] icon in menu serves to increase the
] icon serves to diminish it.
A
icon, later press [
Page 43
]