Target Group; Information About The Product; Eu Declaration Of Conformity - Resol FRH Manual

Target group

These instructions are exclusively addressed to authorised
skilled personnel.
Only qualified electricians are allowed to carry out electrical
works.
Instructions
Attention must be paid to the valid local standards, regulations
and directives!

Information about the product

Proper usage
The relative humidity sensor is used for measuring the rela-
tive humidity as well as the room temperature in compliance
with the technical data specified in this manual.
Improper use excludes all liability claims.

EU declaration of conformity

The product complies with the relevant direc-
tives and is therefore labelled with the CE mark.
The Declaration of Conformity is available upon
request, please contact the manufacturer.
Disposal
• Dispose of the packaging in an environmentally sound
manner.
Subject to technical change. Errors excepted.
6
• At the end of its working life, the product must not be
disposed of as urban waste. Old appliances must be dispo-
sed of by an authorised body in an environmen-
tally sound manner. Upon request we will take
back your old appliances bought from us and
guarantee an environmentally sound disposal of
the devices.
Technical data
For in-wall mounting, Material ASA, co-
Housing
lour: pure white, similar to RAL 9010
Cable gland at the back
Protection type IP 10 according to EN 60529
Dimensions 84.5 x 84.5 x 25 mm
Measuring range:
Humidity:
0 ... 100% RH
0 ... 40 °C
Temperature:
Ambient temperature 0 ... 40 °C