Transport And Storage; Assembly - Bosch Rexroth IMmtcp Manual Del Usuario

20/76 Bosch Rexroth AG
The MS LED indicates the interface module
status.
Table 4 MS
LED display Meaning
Off No voltage or not initialized
Green Module ready for operation
Red Exception error, module in
"EXCEPTION" status or blocking
error
Flashing red Error (but not an exception error),
module continues running in
restricted mode
5

Transport and storage

For storing and transporting the product
always observe the ambient conditions
specified in the technical data (see
"Technical data" on page 25).
6

Assembly

When installing the product always observe
the ambient conditions specified in the
technical data (see "Technical data" on
page 25).
Required tools
• TX9 screwdriver
IMmtcp | 3 609 929 B65/2008-09
Assembling the IMmtcp interface
module
CAUTION
Risk of damage to persons
and property!
Assembly of the IMmtcp interface
module requires basic mechanical
and electrical knowledge.
y Only qualified personnel (see
"Personnel qualifications" on
page 16) are authorized to
assemble the IMmtcp
interface module.
y Measures to prevent
electrostatic discharge (ESD
protection) must be
undertaken to protect the
module and system
components during all
assembly work.
CAUTION
Risk of injuries when
assembling under voltage!
If you do not switch off the power
supply before assembling the
IMmtcp interface module, you may
get injured or the device or system
components may be damaged.
y Always switch off the power
supply to the relevant system
component before assembling
the IMmtcp interface module.