Technical Data - Yamato JS 570/65 Manual De Instrucciones

JS 570/65
1.EQUIPMENT
YAMATO JS 570/65
•
blade
•
Hexagon spanner (M4)
•
Instruction manual
•

2. TECHNICAL DATA

Voltage
Protection degree
Power rating
No load speed
Speed adjust
Angular cutting
Other material cutting depth
Mass
Pendulum action
3. GENERAL SAFETY REGULATION
Read this manual carefully before operation to avoid the hazards such as electric
•
shock, burn of fire.
The work area must be kept clean to avoid danger.
•
Pay attention to the environment, do not expose the tool in rain or humid place.
•
Keep work area lit up. Don't use the tool in presence of inflammable liquid or gas.
Pay attention to do not touch the grounding parts, pipes, heat elements, so that
•
to avoid electric shock.
Take care of the tool. Put it in dry place when not in use, and far from children.
•
Don't overload the tool. Operate only within the load level suggested.
•
Dress properly : Don't wear loose clothing or jewellery because they can be
•
caught in moving parts. Rubber gloves and non-skid footwear are recommended
when working. Wear protective hair covering to contain long hair.
Use safety glasses and dust musk if operation is dirty.
•
Never carry the tool by cord or yank it to disconnect from receptacle. Keep cord
•
far from heat, oil and sharp edges.
Secure work. Use clamps or vice to hold work. It's safer than using your hand and it
•
frees both hands to operate tool.
Keep proper footing and balance at all times.
•
Keep tool sharp and clean for better and safe performance. Follow instructions for
•
lubricating and changing accessories. Inspect extension cords periodically and
replace if damaged. Keep handles dry, clean and free from oil and grease.
Disconnect tool when not in use, before serving and when changing accessories,
•
such as bits.
Remove adjusting keys and wrenches. Check that keys and adjusting wrenches
•
are removed from tool before turning it on.
Avoid unintentional starting. Don't carry plugged-in tool with finger on switch. Be
•
sure that the switch is off when plugging in.
Outdoor use extension cord. When tool is used outdoors, use only extension cords
•
for that use and so marked.
INSTRUCTION MANUAL Mod. JS 570/65
230 V - 50 Hz
class II
570 W
0 ∼ 3.000 strokes/min.
Electronic
max ± 45°
65 mm.
1,8 Kg
3 positions