RIDGID R4040 Manual Del Operador página 12

ASSEMBLY
INSTALLING WATER FILTER AND WATER
PUMP
See Figures 7 - 9.
The water pump recirculates water from the tray to the
cutting wheel.
 Locate filter slots and pump well in water tray. Pump well
is marked, "pump well."
 Slide filter into filter slots, as shown.
 Locate the "Max/Min" water flow selector on the pump.
For best performance, start with the flow to "Max" to
control the flow of water over the wheel.
NOTE: Water flow can be adjusted during use by
removing the filter, reaching into water well and turning
flow selector on pump. Reinsert filter.
 Place water pump into pump well.
WATER
FILTER
PUMP WELL
WHEEL
FILTER SLOTS
WATER TRAY
POWER
CORD
NOTCH
POWER CORD
Fig. 7
12 — English
WATER
FLOW
SELECTOR
WATER PUMP
WATER
HOSE
NOTCH
MAXIMUM
FLOW
PUMP
WELL
Fig. 8