Radio
Memorising stations
automatically
— Best Tuning Memory (BTM)
This unit selects the stations with the strongest
signals and memorises them in the order of
their frequencies. You can store up to 6 stations
on each band (FM I, FM II, FM III, and AM).
Caution
When tuning in stations while driving, use
Best Tuning Memory to prevent accidents.
1
Press (SOURCE) repeatedly to select the
tuner.
Each time you press (SOURCE), the mode
changes as follows:
CD y TUNER
2
Press (MODE) repeatedly to select the
band.
Each time you press (MODE), the band
changes as follows:
B FM I
B FM II
3
Press (SENS/BTM) for two seconds.
The unit stores stations in the order of their
frequencies on the number buttons.
"BTM" flashes while the stations are stored
and a beep sounds when the setting is
stored.
Notes
• The unit does not store stations with weak
signals. If only a few stations can be received,
some number buttons will retain their former
setting.
• When a number is indicated in the display, the
unit starts storing stations from the one currently
displayed.
• If a CD is not in the unit, only the tuner band
appears even if you press (SOURCE).
B FM III
B AM
Memorising only the
desired stations
You can store up to 6 stations on each band (a
total of 18 for FM I, FM II, and FM III, and 6 for
AM) in the order of your choice.
1
Press (SOURCE) repeatedly to select the
tuner.
2
Press (MODE) repeatedly to select the
band.
3
Press and hold either side of (SEEK/AMS)
to tune in the station that you want to
store on the number button.
4
Press and hold the desired number
button ((1) to (6)) until "MEM" appears.
The number button indication appears in
the display.
Note
If you try to store another station on the same
number button, the previously stored station will
be erased.
7