IWC Schaffhausen 5153 Instrucciones De Manejo página 20

To set your watch correctly, proceed as follows:
– Wind the watch fully in position 0, to the point at which you feel a distinct resistance in the crown.
– Pull out the crown to position 2.
– Turn the crown to the left to advance the date display in steps. Set the display to yesterday's date.
– Pull out the crown to position 3. This will stop the movement. To set the time accurately to the
second, it is best to stop the movement as the seconds hand passes 60.
– Turn the hands forwards until the date display changes to today's date. The hands will now be
pos itioned between 12 midnight and 1 a.m.
– Now turn the hands forwards beyond the approximate time. Then move them backwards to the
correct time. If you are setting the watch in the afternoon, you must turn the hands past 12 (noon)
again.
– Push the crown back into position 0 to start the movement.
— 2 1 —
SET TING YOUR WATCH CORRECTLY
PORTUGIESER HAND -WOUND MONOPUSHER