Safety Precautions And Regulations; Safety Precautions Before Use; Notices - Xplova NOZA S Guia De Inicio Rapido

Safety precautions and regulations

S
AFETY PRECAUTIONS AND REGULATIONS

Safety precautions before use

1. Specs of the Xplova NOZA S power adapter are as follows:
• Input: 100 ~ 240 VAC / 1.5 A
• Output: 12 VDC / 5.0 A
• Power plug: External diameter 5.5 m/m; internal diameter 2.5 m/m; length 10~12
m/m
2. Only use the power adapter certified by the Xplova NOZA S. Non-compliant power
adapters will cause irreparable damage to the bike trainer.
3. When the bike trainer is active, please do not touch it and you should keep non
users, animals or objects away from it to avoid danger.
4. Consult your coach before you start any training plans.
5. Please DO NOT put your hands or any object near the spinning parts of the
Xplova NOZA S.
6. The flywheel/cassette of the Xplova NOZA S might get hot after you use it for a
while. Please DO NOT touch the flywheel/cassette within a short time.
7. Please DO NOT attempt to disassemble the bicycle when the cassette is running.
8. When you are using the Xplova NOZA S, keep your children and pets away from it
to prevent injury.
9. The Xplova NOZA S can only be installed and used on a firm, level ground.
10. When training is in progress, please ride safely.
11. Keep away from water.
12. Before training, you should check if the bicycle is firmly secured to the Xplova
NOZA S.
13. The Xplova NOZA S can only be used after it is completely assembled.
14. When using the Xplova NOZA S, you can only use accessories and power
adapters certified by Xplova.

Notices

1. Xplova shall not be held responsible for users using software, applications and
devices from other companies that result in malfunctioning of the Xplova NOZA S.
2. As ANT+™ and Bluetooth are mutually exclusive, it is impossible for the Xplova
NOZA S to send data simultaneously through ANT+™ or Bluetooth, i.e., when one
of the protocols is in use, the Xplova NOZA S will automatically stop the other
protocol to avoid the possibility of causing NOZA S programs to misbehave.
3. Radio devices may cause interference and may change or completely prevent the
Xplova NOZA S from functioning normally. Therefore, when training using the
NOZA S, it is advised to stay away from high voltage power lines, traffic signals,
railway power lines, buses or trams.
EN-10