Xplova NOZA S Guia De Inicio Rapido página 9

3. Put the front leg on the ground as a support to lift the trainer, put a square head
hexagon bolt through the square hole on the rear bottom tube and secure it
tightly with the trainer main unit. Then use the socket wrench to screw the
hexagon nut tight and install the decorative bolt cover.
4. After installing the tuning knob according to the illustration, screw tight the knob
to finish assembling the trainer.
5. Install the cassette (sold separately) into the cassette body and lock the
cassette nut to prevent loosening.
Attention:
The Xplova NOZA S bike trainer cassette body is compatible with
Shimano and SRAM cassette which can be directly installed with an 11-
speed cassette. If you are using a non-11-speed cassette, please fit the
cassette washer on the bottom of the cassette body first before installing
the cassette.
EN-5
Assembly Instructions