Before Using For The First Time; Use - Krups DEFINITIVE Serie Manual Del Usuario

Ocultar thumbs Ver también para DEFINITIVE Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

KR_KETTLE_NC00113221-06_NAFTA_Mise en page 1 14/02/13 17:11 Page7
C. If a long detachable power cord or an extension cord is used:
1) the marked electrical rating of the detachable power cord or extension cord should
be at least as great as the electrical rating of the appliance.
2) If the appliance is of the grounded type, the extension cord should be a grounding
type 3-wire cord.
3) the longer cord should be arranged so that it will not drape over the counter where
it can be pulled on by children or tripped over accidentally. The appliance may
have a polarized plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit into a polarized outlet only one way. If
the plug does not fit fully into the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt to modify the plug in anyway.
Krups reserves the right to modify the characteristics or components at any time in the
interests of the consumer.

BEFORE USING FOR THE FIRST TIME

1 Remove all of the various packaging, stickers or accessories from both the inside and
outside of the kettle.
2 Adjust the length of the cord by unwinding it under the base. Wedge the cord into the notch.
(fig 1)
Throw away the water from the first two/three uses as it may contain dust. Rinse the kettle
and the filter separately.
1 To open the lid:
Press down on the locking system button. (fig 2)
When you press on the locking system button the lid will lift automatically.
To lock the lid push down on the top part of the locking system button.
Note: Do not use your kettle without its lid. In case the lid is lost or broken, please contact
your after sales service center.
2 Place the base on a flat, stable, heat-resistant surface away
from water splashes and any sources of heat.
Note: Kettle is only to be used with the base provided.
3 Fill the kettle with the desired amount of water. (fig 3a and 3b)
You can fill it through the spout, which ensures better maintenance of the filter.
Never fill the kettle when it is on its base.
Do not fill it above the maximum level, or below the minimum level. If the kettle is too full,
boiling water may spill out.
Do not use without water.
Check that the lid is closed properly before use.
The kettle must always be used with its own anti-scale filter.
4 Position the kettle on its base. Plug it into the wall outlet.

USE

7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bw740

Tabla de contenido