Logitech GROUP Guía De Preparación página 6

CONNECTION AND SETUP
Setup and connection to a computer
Press the cables into the slots on the bottom of
the speakerphone
Connect the power cable to the hub and plug in the power
adapter The display on the speakerphone will turn on
and show the Logitech logo when powered
4 Connect the hub to a USB port on your computer
The speakerphone display will also prompt you to make
this connection The camera and the Activity light
will flash to show that connection is taking place,
and when completed, the camera head will rotate and
the speakerphone will play a sound If these activities do not
take place, try again and then consult Troubleshooting or
contact technical support
English — 6
Cable slots