Publicidad
U P
®
C
®
ASME A112.18.1 / CSA B125.1
ASME A112.18.2 / CSA B125.2
ICC/ANSI A117.1
Model/Modelo/Modèle
65880LF & 65881LF
Series/Series/Seria
Siderna
™
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need / Usted puede necesitar / Articles dont vous pouvez avoir besoin:
For easy installation of your
Brizo
®
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
• To purchase the correct water supply hook-up.
Para instalación fácil de su llave
Brizo
usted necesitará:
®
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
• Comprar las conexiones correctas para el
suministro de agua.
Pour installer votre robinet
Brizo
facilement, vous devez:
®
• LIRE TOUTES les instructions avant
de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
• Acheter le bon nécessaire de raccordement.
TWO HANDLE WALL MOUNTED LAVATORY FAUCETS
63480
LLAVES DE AGUA DE DOS MANIJAS DE LAVAMANOS
PARA INSTALACIÓN EN LA PARED
ROBINETS À DEUX MANETTES POUR LAVABO,
MONTAGE AU MUR
63480
1
09/24/11
Rev. D
Publicidad
Tabla de contenido
Manuales relacionados para Brizo Siderna 65880LF
Resumen de contenidos para Brizo Siderna 65880LF
- Página 1 Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. You may need / Usted puede necesitar / Articles dont vous pouvez avoir besoin: For easy installation of your Brizo ® faucet you will need: • To READ ALL the instructions completely before beginning.
-
Página 2: Cleaning And Care
This warranty excludes all industrial, commercial & business usage, whose purchasers are parts may be obtained by calling 1-877-345-BRIZO (2749) (in the U.S. and Canada) or by hereby extended a five year limited warranty from the date of purchase, with all other terms of writing to: this warranty applying except the duration of the warranty. - Página 3 Plasterguard Protector de yeso Gabarit de plâtrage RP63794 Spout Flange and Gasket Reborde del Surtidor y Empaque Collerette du bec et joint RP49434 O-Rings Anillos “O” Joints Toriques RP61824 Valve Cartridge, Cold Side Cartucho de la Válvula, Lado Frío Cartouche de soupape, eau froide RP61825 RP63795 Valve Cartridge, Hot Side...
- Página 4 MAINTENANCE – SPOUT SHUT OFF WATER SUPPLIES BEFORE SERVICING VALVE OR SPOUT ASSEMBLIES If your faucet leaks at base of spout, replace o-ring (12) on spout adapter (13). A. Loosen set screw (14) on bottom side of spout and pull straight out on spout to remove it from adapter.
-
Página 5: Faucet Installation
Min. 11 1/2" Min. 11 1/2 po Min. 3" Min. 3 po 2 3/4" ± 1/2" 2 3/4 po ± 1/2 po WATER LINE CONNECTIONS FAUCET INSTALLATION Install 1⁄2" hot and cold supply piping (1) to the valve body. Construct a suitable stud brace for mounting of the valve body. Refer to the roughing-in Temporarily pull plaster guards (2) from valve body. - Página 6 4" (100 mm) 1 5/8" (41.2 mm) Square 1 3/4" (47.6 mm) Diameter COMPLETE FINISH WALL Complete fi nish wall with 1 5/8" square holes for handles and 1 3/4" diameter hole for spout shank. Space hole centers 4" (100 mm) apart. NOTE: To ensure proper fi...
-
Página 7: Handle Installation
HANDLE BASE INSTALLATION HANDLE INSTALLATION Slide handle base (1) and gasket (2) over trim sleeve (3). Secure base against Place glide ring (1) into the groove in the bottom of handle (2). Make wall with set screw (4). Install button (5). Repeat for other end valve.Option: If sure valve cartridge is in the off position. - Página 8 FLUSH YOUR SYSTEM Turn both faucet handles (1) to full open position. Turn on hot and cold supplies (if not already open) and flush water lines for one min- Grid Strainer Installation ute. Important: This flushes away any debris that could cause damage to internal parts or disrupt water flow from your faucet.