Cequent Performance Products 36598 Instrucciones De Instalación página 4

1. Loosen wheel well liners - use 8 mm and 10 mm socket to remove (3) screws and (1) plastic flange nut from wheel well liners each side.
2. Enlarge access hole – peel off (3) plastic covers from holes on the frame rails each side, see Figure 2. Locate the rearmost hole and use die grinder to
enlarge the hole size big enough to feed the bolt and spacer each side, see Figure 2.
©2017 Cequent™ Performance Products, Inc. - Printed in Mexico Sheet 4 of 15 36598NP 05-01-17 Rev. A