Cequent Performance Products 24941 Instrucciones De Instalación página 6

6. Trim fascia – measure, mark, and trim fascia as shown
5. Tighten all fasteners with torque wrench to
20 Lb.-Ft. (27 N*M)
Proper torque is needed to keep the hitch secure to the vehicle
when towing.
3-1/4"
2-1/4"
Figure 4
CENTERLINE OF BUMPER
Bottom View of Bumper Fascia
7. Reinstall taillights and wiring – reconnect the wiring and reinstall
the taillights using the original (4) phillips head screws, (2) per side.
©2016 Cequent™ Performance Products, Inc. - Sheet 6 of 18 24941NP 3-30-16 Rev. A
Printed in Mexico