Cequent Performance Products 76004 Instrucciones De Instalación página 4

1. Disconnect electrical plugs and remove wire retainer from bumper 2. Remove vehicle step bumper by removing two (2) bolts on each side of
support structure. bumper brackets.
3. Remove vehicle bumper support by removing the four (4) bolts from bottom of frame and the (2) M8 bolts at spare tire cradle (keep M8 bolts to re-install).
©2016 Cequent™ Performance Products, Inc. - Printed in Mexico Sheet 4 of 15 76004N 2-9-16 Rev. A