PoolMaster 59026 Manual De Instrucciones página 5

2. The Solar Heater will come
with the PVC
already threaded over the IN
and OUT openings at the
bottom right and left sides of
the Solar Heater. Remove the
PVC Couplings from both
sides.
3. Place O-rings on the short
side of each of the Hose adap-
tors and insert that same side
into the IN and OUT openings
of the Solar Heater. Attach the
PVC Couplings over the Hose
adaptors and tighten to secure.
4. Plug the return fitting from
inside the pool to ensure that
water does not flow out of the
pool when disconnecting the
return hose from pool's return
Inlet in the next steps.
5. Make sure the filter pump is
turned OFF so no water flows out
of the filter when disconnecting
the return hose from the swim-
ming pool return Inlet.
5
Couplings