Infiniton WM-K10IN Manual De Usuario página 43

Troubleshooting
Display
NOTE
Please refer to the actually purchased model for fault display here.Different models have
different fault displays
Meaning
The washer fills over
time
Water drainage over
time
Door lock is breakdown
Water is overflowed
The electrical motor is
breakdown
The heater does not
work
There is a temperature
sensor fault
Communication
failures
Inverter Motor failures
The procedure running is
not corresponded to the
cycle that the knob points
Check if the tap is open.
Check if the water preassure is
too low.
Check if the inlet hose is blocked.
Check if the drain pump is blocked.
Contact a technician if necessary.
Close the door well again.
Check if the clothes are caought
between the door and seal.
Contact a technician if necessary.
Let the machine drain out water
automatically until the water level
is suitable for wash procedure.
Contact a technician if necessary.
Please contact a technician
Please contact a technician
Please contact a technician
Please contact a technician
Please contact a technician
Turn the cycle selector to the
cycle corresponded to the
procedure working on.
17
Solution